, ,

Naming Conversion Table Name end with _ALL, _TL, _VL, _V, _F, _A, _B, _S, _AVN and its Meaning

  • _ALL : Table holds all the information about different operating units. Multi-Org environment. You can also set the client_info to specific operating unit to see the data specific to that operating unit only.
  • _TL : are tables corresponding to another table with the same name minus the _TL. These tables provide multiple language support. For each item in the table without _TL there can be many rows in the _TL table, but all with different values in the LANGUAGE column.
  • _B : these are the BASE tables.
    They are very important and the data is stored in the table with all validations.
    It is supposed that these table will always contain the perfect format data.
    If anything happens to the BASE table data, then it is a data corruption issue.
  • _F : these are date tracked tables, which occur in HR and Payroll. For these there are two date columns EFFECTIVE_START_DATE and EFFECTIVE_END_DATE which together with the PK identifies a row uniquely. The date intervals cannot overlap. Many think they are Secured data. Guess someone from Oracle confirms.
  • _V : tables are the views created on base tables
  • _VL : are views for multi language tables which combines the row of the base table with the corresponding row of the _TL table where the LANGUAGE = USERENV(‘LANG’).
  • _S : are sequences, used for finding new values for the primary key of a table.
  • _A : are Audit Shadow Tables
  • _AVN : and _ACN are Audit Shadow Views (when data was changed, and with what values
/by
, , ,

Troubleshooting Remit To Address in Oracle Receivables

Troubleshooting Details

1.  Setup and Usage of Remit-To Address in Oracle Receivables

Define remit-to addresses to let your customers know where to send payment for their invoices. Receivables uses the addresses that you define in the Remit To Addresses window to provide default remit-to information when you enter transactions.  Remit-To Addresses are also printed on invoices and optionally printed on Statements and Dunning Letters (Based upon the selections in the System Options window for AR). 

If you use AutoInvoice but have not defined a remit-to address that can be derived for a specific bill-to address,  AutoInvoice will reject all invoices for which it could not determine a remit-to address with the following message in the AutoInvoice Import Execution report:

Errors: 1) Cannot get remit to address

If you do not wish to set up a remit-to address for each location, you can set up one remit-to address with a default assignment. Receivables will then use this address for all locations or for any locations for which you do not have specific location assignments. This ensures that AutoInvoice will not reject invoices because it could not determine a remit-to address.

For more on setting up Remit-To Addresses in Oracle Receivables including step-by-step instructions and screenshots, refer to Note 1101666.1, How to Setup a Remit-To Address in Release 12 Oracle Receivables.
2. Troubleshooting Remit-To Address Issues and Errors on Transactions

    a. Error: Cannot Get Remit To Address

This is the most common error reported for Remit-To Addresses.  The steps below outline how you can determine what value should be used and also how to fix this problem.

Alternate Error Presentations:

WARNING: No default remit-to address found
WARNING: No default remit-to address (country) found

        i. Identify The Customer Bill-To Address

The Remit-to Address is derived based upon the customer Bill-To Address.  You should therefore begin troubleshooting by identifying the Bill To Address (State, Postal Code and Country)

        ii. Identify the Operating Unit on the Transaction

For a Manual Invoice, this can be found by looking at the list of values on the Transaction Source as shown below:

For AutoInvoice this can be found
Responsibility:  Receivables Manager
Navigation:  Control > AutoInvoice > Interface Lines

As shown above the Operating Unit field will be displayed.  If AutoInvoice failed with an error, query this form for any rows where the “Errors Exist” checkbox is checked.  This will return a listing of all rejected records.  Find the row that is showing a rejection reason of ‘Cannot Get Remit To Address’ and take note of the operating unit displayed for that row.

        iii. Check your Remit-To Address Setup

Note 1101666.1 explains in detail how to set up a Remit-To Address. 

Open the Remit-To Address form as shown below

Responsibility: Receivables Manager
Navigation:  Setup > Pring > Remit To Address

Find the row or rows associated to your Operating Unit and check to see if the bill to address is covered by the “Receitps From” definition.

The most common cause of an error in deriving a Remit-To address is in this “Receipts From” mapping.  A best practice to avoid problems is to set a default remit-to address for all countries where you transact.  This allows you to avoid errors during AutoInvoice and transaction entry.  In the example above we have defined this California address as the default for all Canadian bill-to addresses. 

Note: You can derive an alternate remit-to address with a more narrow definition.  For example, if you have a default for the United States with a New York address but then have a California address that is mapped to a specific Postal Code range, the system will use the California address ahead of the default address for any address in the from/to postal code range

In this example the Invoice had a Florida address but tthe Receipts From shows no combination that includes this Florida Address.   Assuming the Row above with the New York address also does not cover this Florida addess we can fix this defaulting issue by modifying the “Receipts From” to include the Bill  To address from the Invoice.

    b. Can I Use Additional Factors to Default the Remit-To Address?

At this time the only factors available to derive remit-to address are Geography and Operating Unit.

    c. Remit-To Address is not Defaulting

Refer to section 2a and verify that the address is properly mapped in the ‘Receipt From’ setup.

    d.  Unable to Delete Obsolete Remit-To Address

Receivables does not allow for a remit-to address to be deleted.  It is suggested that instead of deleting an address, the Receipt From values under the address simply be deleted.

    e. Remit-To Address Does Not Include All Address Segments

ARXSURMT.fmb , Remit to Address Form has Record group State based on the following query:

select state_code, description
from ar_remit_to_state
where country = :loc.country

Ar_remit_to_state is a view based on hz_locations table.  Data is populated in this table as customer addresses are created thus if you have not yet defined customers the LOV will not show the segments as available for selection. 

For more on configuring geographies in R12 refer to Note 554492.1 Setting Up Geography Hierarchy And Address Validation in Release 12

    f. Remit-To Bugs and Other Common Errors

Row
 Release Error String or Presentation  Cause Recommended Fix*
1
 12.0 When using Multiple Org’s in AR, if a transaction type is entered for operating unit “A” and then subsequently changed to a transaction type associated with operating unit “B”, the Remit-To address is not being updated to reflect this change. Bug 8642210 Remit To Address not properly refreshed Recommended Patch: 
12.0 Patch 9451008
12.1 Patch 9343518
Fixed File: ARXTWMAI.pld 12.0: 120.163.12000000.72
12.1: 120.180.12010000.46
2
 12.0
Re-display the remit-to address details, the following error message is displayed:
No HZ_CUST_ACCT_SITES was found for ID XXXX
 Bug 8522000 Recommended Patch:
12.0: patch 8331653
Fixed File: HzPuiAccountSiteAMImpl.java 120.22.12000000.3
12.1Patch 8522000
Fixed File: HzPuiAccountSiteAMImpl.java 120.25.12010000.2

Fix is included in 12.0.6 and 12.1.2 forward
3
 12.0 iSetup is creating duplicate Remit-To addresses instead of updating existing records Bug 6729003 Patch 6729003
See also Note 550257.1
4
 12.0 AR_DEPOSIT_API is not Defaulting the correct remit-to address via the Bill To Location Bug 9451008 Recommended Patch:  Patch 9451008
Fixed File: ARXDEPLB.pls
12.0.6
120.11.12000000.4
12.1
120.12.12010000.3
5
 12.0 
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00100: DEBUG: BeforeReport_Trigger +
 Remit-To Address was not defined and invoice print was attempted Define remit to address and/or default remit-to
6
 12.0
Query a transaction returns:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "APPS.ARP_TRX_DEFAULTS_3", line 1463
Debug log showed:
selecting the default remit to address.
EXCEPTION: arp_trx_defaults_3.get_default_remit_to()
EXCEPTION: arp_trx_defaults_3.get_remit_to_address()
---------- Parameters for arp_trx_defaults_3.get_remit_to_address() ----------
p_match_state : NJ
p_match_country : US
p_match_postal_code : 07095
p_match_address_id :
p_match_site_use_id :
EXCEPTION: arp_trx_defaults_3.get_remit_to_default()
 Remit-To address not properly defined Review/correct setup.
7
 11.5 – 12.1
When printing a specific credit memo, it errors with the following:
MSG-43749: There is no remit to address defined for country US and state XX.
REP-1419: 'remit_to_control_idformula': PL/SQL program aborted.
 The zip code for this credit memo was not included in any of the existing remit-to ranges. Make sure a valid range is defined for the zip code on the transaction.

1. SetupPrintRemit-To Address –> Add a range for zip code 09136 (this problem zip code in this example) which is the zip for the credit memo.
2. A new line can be added, or you can alter the existing range for the that state to include the new zip code

Alternately you can set a default to be used to avoid this issue.
8
 11.5 – 12.1 
APP-FND-00676 The flexfield routine FDFGDC cannot read the default 
reference field specified for this descriptive flexfield
 Incorrect setup of descriptive flexfield for Customer Form Customer form and Remit-To address form share a common foundation.  Enhancement 3100593 was logged to split these apart.  Until this is fixed it is suggested that the DFF not be used on the Reference Field for the Address InformationDFF
9
 11.5 
Remit-to Address Does Not Exist In The List of Values.
State/Country combination already exists.
APP-AR-96282 Error: Invalid value for party_site_id
 Data Corruption of unknown origin (rare occurrence) Perform the following steps to resolve this issue: Verify Issue
1.) select address_ id
from ra_remit_tos_all
where country = ‘DEFAULT’
and state = ‘DEFAULT’;

2.) Select address1, address2, address3, city, state
from ra_addresses_all
where address_id = ‘&address_id_step1’;

If query 2 returns no rows then corruption exists.  Contact Support for assistance
10
 11.5
Entering new Remit-To address returns:
APP-AR-96282: Error: The following SQL error occurred:
ORA-29861: domain index is marked LAODING/FAILED/UNUSABLE
 Corrupt domain index 1. Rebuild the domain indexes associated to the form as described  in Note 165115.1

HZ_CUST_ACCT_SITES_ALL_T1
HZ_LOCATIONS_N15
HZ_STAGE_PARTY_SITES_T1
11
 11.5
Opening Remit-To Form from OM returns:
ORA-06550: line 1, column 7:
PLS-00905: object APPS.ARP_STAX_165 is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
ORA-06512: at "APPS.ARP_STAX", line 371
Item Validation Organization is not set. 1. Order Management Responsibility, N: Setup > System Parameters > Values
2. Select the ‘Generic Parameters’ Category.
3. Pick your org into ‘Item Validation Organization’
4. Save your work.
12
 11.5 
ORA-06550: line 1, column 7:
PLS-00905: object APPS.ARP_STAX_5749 is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
ORA-06512: at "APPS.ARP_STAX", line 371
FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-06550.
Tried to compile ARP_STAX_5749 package and got the following error message:
PLS-00920: parameter plsql_native_library_dir is not set.
 ARP_STAX package for this ORG_ID was in status invalid. set parameter plsql_native_library_dir and bounce the DB to take effect
13
 11.5 
APP-AR-96282 Error:Value for Party_site_number must be unique.
 The profile HZ: Generate Party Site Number is ‘No’

The remit-to-address does not have the field to enter the site number in that case must be generated

 This is ER: 3297103: ‘GENERATE PARTY SITE NUMBER’ IS ‘NO’,SITE NUMBER IS
COUNTED BY AUTO.

Workaround
———-

1. Go into the responsibility: System Administrator
2. Create a new responsibility to have the privileges to create the remit-to-address setup
3. Assign thjavascript:void(0)at responsibility to the user in charged to do that

or

1. Go into the responsibility: system Administrator
2. Navigate to Profile System
3. Put the profiles
HZ: Generate Contact Number
HZ: Generate Party Number
HZ: Generate Party Site Number
in Yes, for the User designated to create the remit-to-address or a Dummy user that will do that
14
 11.5 
Rep-1401: 'C_Remit_To_Concatenateformula' Ora-01403: No Data Found
 Remit-To Address and/or Default not defined Setup Remit-To Address as per Note 1101666.1
15
 12 Remit to address does not show in Dunning  Bug 9437627 Patch 10198415

Fixed File ardlgm.lpc 115.47.15104.38 (or higher).

*Note: that the patch recommendation is for the latest released version of the file and not necessarily the version that included the fix.  For example, if version 46 is the fixed file, the recommended patch may contain version 72 of the fixed file.  This fix will include the bug fix referenced here as well as any other bug fix released since the bug was resolved.

3. Troubleshooting Printing Related Remit-To Address Issues and Errors

    a. Remit-To Address is Not Printing, No Errors

By default the system should print the remit-to address from the invoice when printing statements, dunning and invoices.  If this does not print verify the following:

1) Check in Setup -> System -> System options, Alternate Region- Miscellaneous if the Print Remit to Address flag is checked
2) Verify that the invoice has a remit-to address defind

    b.  Remit-To address Errors with MSG-43749: There is no remit to address defined for country and state

This problem has been reported when the default value contains postal codes.  Removing the postal code has proven to remedy this symptom.

    c. Is it possible to highlight the Remit-To Address when printing?

In BPA, you can select “Bold” or “Regular” for the content item value.

Hence, you can duplicate the default template and make the remit to address as “Bold”.  It is even possible to make BOLD only a part of the Remit-To address.
Instead of using BPA content item ‘Remit To Address Formatted’, use each individual content item such as ‘Remit Address 1’, ‘Remit Address 2’ etc.

4.  Descriptive Flexfields on Remit-To Addresses

The top zone of the Remit-To Address form displays the “Address Information” DFF. This is by design. This allows one to see additional address info for the current address displayed. The “Receipts From” zone is where the “Remit Address Information” DFF is available

/by